Yarde Metals / Product Literature
Line Card
Materials, forms and processing from the Yarde Metals product line card.
Aluminum
| Form | Alloys | Published sizes and details |
|---|---|---|
| Bar | 2011, 2024, 6061, 6020, 6063, 6083, 6262, 7075 | Rounds: 1/8"-17"; flats: 1/8"-8" thick, up to 18" wide; hexes: 3/16"-3"; squares: 3/16"-8". Cold finished, extruded and screw machine. |
| Pipe & tube | 2024, 3003, 5086, 6061, 6063, 7075 | Round, square and rectangle: .250" OD x .035" wall to 15" OD x 2" wall. Drawn tube, extruded seamless, extruded structural and schedule pipe. |
| Structural shapes | 2024, 6061, 6063, 7075 | Angles, channels, I-beams and H-beams: 1/2"-12". American Standard, Aluminum Association and sharp corner. |
| Hi-mag marine | 5083, 5086, 6061 (ABS certified), 316L #8 polished | Sheet, plate, bar, structurals, special shapes, pipe and tube. ABS, DNV or Lloyds certified. |
| Sheet, plate, coil & tread plate | 1100-O/-H14; 3003-H14/-H22; 5052-H32/-H34; 5083/5086-H116 | .020"-.249"; 36"-96" widths; up to 360" length. Includes firetruck-quality tread plate. |
| Heat-treat sheet, plate & coil | 6061-T6, tread plate; 6061-T651 | Sheet: .020"-.249", 36"-72" widths, up to 360" length. Plate: 1/4"-16" (over 12" in T6), up to 96" widths. |
| Mold plate | M-1, M-5, MA-5, QC-10 | 1"-40". |
| Precision cast plate | MIC-6, K100-S, ALCA-5 | 1/4"-4". |
Stainless steel
| Form | Alloys | Published sizes and details |
|---|---|---|
| Bar | 303, 304L, 316L, 316L VAR, 321, 347, 410, 416, 416 HT | Rounds: 1/16"-24"; flats: 1/8" x 3/8" thick up to 4" x 16"; hexes: 3/16"-3"; squares: 3/16"-6". 303/304L precision ground: P .0000/M .0002. 416 HT: RC 26-32. |
| Pipe & tube | 304/316L seamless tubing; 304L/316L welded & seamless pipe | Ornamental tubing: round, square and rectangle; polished available. |
| Structural shapes | 304/304L, 316/316L | Hot rolled and annealed. Angles, channels, I-beams and H-beams: 3/4" x 3/4" x 10" to 6" x 6" x 1/2". Unequal angles available. |
| Sheet, plate & coil | 303, 304/304L, 316/316L, 304 tread plate, 321, 410, 416, 430, 441, 13-8, 15-5, 17-4, duplex | Sheet/coil: 26-7 ga, 36"-72" widths, 96"-240" lengths. HRAP plate: 3/16"-6", 36"-96" widths, 96"-240" lengths. Finishes: #1, #2D, #2B, #4 polished and #8 mirror polished. |
Carbon steel
| Form | Alloys | Published sizes and details |
|---|---|---|
| Bar | 1018, 1045, 1045 TG&P, 1144, 12L14, 1215, 4140, 4340, 8620, A36 | Cold drawn, hot rolled and screw machine. Rounds: 1/2"-12"; flats: 1/8" x 4" to 4" x 14"; hexes: 1/4"-2"; squares: 1/4"-6". |
| Pipe & tube | Cold rolled electric weld, hot rolled electric weld, drawn over mandrel | Round, square and rectangle: .250" OD x .065" wall to 6" OD x .250" wall. |
| Structural shapes | Hot rolled A36/A529 | Angles, channels and beams: 1/2" x 1/2" x 1/8" to 4" x 4" x 3/8". |
| Sheet, coil & plate | A36, A572 Gr 50, A588 armor plate | Hot rolled, pickled and oiled, cold rolled commercial quality, galvanized, galvannealed and aluminized. Sheet/coil: 24 ga-1/4", 36"-72" widths, 96"-240" lengths. Plate: 1/4"-4", 48"-96" widths, 96"-240" lengths. |
Brass, bronze & copper
| Form | Alloys | Published sizes |
|---|---|---|
| Standard & Swiss-quality bar | 110, 145, 360, 932 | Rounds: 1/8"-12"; flats: 1/4"-1/2" to 2" x 6"; hexes: 1/4"-2"; squares: 1/4"-2-1/2". Swiss-quality tolerances available. |
| Sheet & plate | 110, 260 | Sheet: .020"-.1875" thick. Plate: 1/4"-3" thick. |
Aerospace
| Material | Published range |
|---|---|
| Extrusions | 2014, 2024, 6061, 6063, 7050, 7055, 7075, 7150. Roll forms, angles, channels, zees, tees, bulbs, stringers, seat tracks and H-beams; LS, GAS, BAC, 60- and more. |
| Sheet | 2024-0/-0 ALCL/-T3/-T3 ALCL; 7075-0/-0 ALCL/-T6/-T6 ALCL. |
| Plate | 2024-T351: 1/4"-6"; 7075-T651: 1/4"-9"; 7075-T7351: 1/4"-6"; 7050-T7451: 1/2"-8". |
| PH-grade stainless bar | 17-4 PH and precision ground sizes; 13-8, 15-5 PH VM, 15-5 VM ESR. |
| Nickel & high-temperature alloys | 718: AMS 5662; 625: AMS 5666; LCS & GE certified. |
| Specialty alloys | 420, 440 C, 455, 455 PG, N60 (Alloy 218, UNS28100), 4340 VM N&T. |
Processing & finishing
- Laser
- Waterjet
- Cut-to-length
- Plasma & flame
- Bar & plate sawing
- Precision plate cutting
- Circles & rings
- Gauered bar / sheared & edged
- Duplex milling
- Lathe turning
- Chamfering
- Deburring
- Grinding
- Polishing
- LCS testing
- Heat treating
- UT testing
- Nesting
- Kitting
- Custom packaging
- CAD/CAM design services
- Custom extrusions and finishing: anodizing, polishing, paint and powder coating